Potting adhesive for LED Strip->chemical industrial materials

Join

Help

Shenzhen Anpin Silicone Materials Co.,Ltd

Home

Company Profile

Products

Video

Inquiry

	Recommended Results

Potting adhesive for LED Strip

Category :

Chemicals->chemical industrial materials

Product Specification

Model No:	AP-905L

Country	CN
Brand	Anpin
Materials	silicone
Color	transparent

Product Detail

1 General Introduction:
AP-905L is double component, room temperature curing silicone modified resin system. After curing, it becomes clear and transparent elastic protection coating, it consists of A, B components liquid. Mixed A, B components with weight ratio 1: 1, the mixed liquid will cure and become soft elastomer. AP-905L is composed of polymer organic silicone modified resin material by processing. It has excellent ability of weather resistance and uviofast, can fully satisfy the demands of encapsulation and protection of LED Strip. Comparing to epoxy resin, it has some obvious advantages like better transparency, flexbility, especially excellent anti-yellowing performance. In outdoor sunlight, AP-905L will not turn yellow above at least 5 years.

2 Application:
Widely applying to decorative lighting, LED Strip, various scutcheon, nameplate, encapsulation and coating protection of PCB board, and potting protection of various electronic appliance. It has good performance of waterproofing and moisture-proof and uviofast.

3 Usage:
1 Weigh: Weighing A, B component exactly (fully mix A, B component separately before weighing); Fully mix A and B component with weigh ratio 1: 1.
2 Mixing: Add B component to A component and mix uniformly. Manual method can be used in mixing, or use mixing and dispensing equipment. Using manual method to mix, you should notice not match too much glue one at a time, to avoid reducing upper liquidity and difficult to encapsulating compound.
3 Defoaming: Putting the mixed liquid into the vacuum cabinet to deaerate, use Vacuum way to wipe off entrained air(Bubble expands rapidly in vacuum condition, and this will lead to volume expanding of the glue in the cup, so we suggests the volume of the glue in the cup not to exceed one third of the cup's volume when vacuumizing.
4 Pouring: Instilling to the surface of LED Strip of scutcheon manually(Keep the body surface and mixer dry and clean before dripping glue. )
5 Picking bubble: Use pin to stir the surface of the glue and make glue bespread the surpace, then needle residual bubble.
6 Curing: Put the instilled products in room temperature and it will be spontaneous curing(If heat curing needed, the baking temperature cannot be above 60 degree, we suggest to control the temperature within 50~60 degree.

4 Packaging and Storage:
20kg/set(A component 10kg+B component 10kg), 40kg/set, 400kg/set, in
Pail. Shelf life: 3 month.

5 Attention:
1. This product belongs to non-dangerous goods, can be shipped as common chemical products.
2. Pls preserve in cool and dry place, around 25 degree, RH<70%. In shade and airtight, Pls see production date on pail.
3. For manual drip, pls according to exact weigh, mix fully; If the weigh is above 200g, the operation time will shorten.
*Notice: The above performance data is typical data for this product tested in humidity 50%, temperature 25 degree, only for customer's reference, and cannot ensure the exact data you can get in some special environment. Customers have responsibility to assure the product's actual situation in the operating environment, and if their actual service situation is suitable or not; We will provide customers with quality products equal to the confirmed sample.

More Products from this Supplier

silicone sealant


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.